Fusion bond is a type of powder coating that is epoxy based. This is commonly used to protect steel pipes in various pipeline construction. Piping connections benefit a lot from this material as this protects the steel surface from corrosion. Pipes and bars must be protected from external factors that are likely to cause damage on the surface.
For the application process, coating application temperature must be reached first. In this specific temperature, the powder will melt and turn into liquid form making way for easier application. The liquid solidifies shortly after application until it completely cures. When the coating completely cures, the chemical change cannot be reversed therefore the coat stays in place.
Pipes have steel surfaces and they perform tough functions. There is a wide variety of pipe connections and most of them are found underground. With the function they have and their location, these are prone to surface damage. These fixtures need to be protected from corrosion. That job can be fulfilled by the right kind of coating material.
This material is also the premier type that is used and approved my many users due to its durability. Such quality is important for any material as this enables it to withstand the test of time. Materials that are durable can tolerate changing conditions of the environment allowing them to last longer to fulfill their purpose. This is also preferred for its ease of application.
Nowadays, there are different variations of this coating which are dual coating and rough coating. Dual coating is often applied to subsea pipelines and those which are exposed to tough environmental settings. This has much resistance to impact and is very flexible. Rough coating as the name implies has a rough surface which is also non slip.
Before the coating is applied, surface preparation is necessary. This can be done by thorough inspection of the surface to see if there are any imperfections or dirt. Oil and grease are thoroughly removed from the surface. Imperfections can be removed by grinding, filing, and blasting. The surface is heated before the application is started.
The coating must be immediately applied after the heating process to prevent excess cool down. If the pipe or steel surface has cooled down too much, the coating may not be able to fully cure. This can be prevented by reheating the surface to be coated. This coating is typically applied using application ring or electrostatic guns. It will dry in a few minutes until it completely cures.
A lot of manufacturers now have their own products to offer for those who need the coating material. When purchasing these products, buyers must look into the specific instructions recommended by manufacturers for the application process. Each kind of product may come with its own instructions as well as the ratio for application.
Professionals who are working on commercial or industrial piping connections can make use of fusion bond coating. This can even be used in for some residential applications depending on the needs. One must realize the benefits and advantage of using this coating material. With that, it is of much importance to find the right kind of product to use for an application.
For the application process, coating application temperature must be reached first. In this specific temperature, the powder will melt and turn into liquid form making way for easier application. The liquid solidifies shortly after application until it completely cures. When the coating completely cures, the chemical change cannot be reversed therefore the coat stays in place.
Pipes have steel surfaces and they perform tough functions. There is a wide variety of pipe connections and most of them are found underground. With the function they have and their location, these are prone to surface damage. These fixtures need to be protected from corrosion. That job can be fulfilled by the right kind of coating material.
This material is also the premier type that is used and approved my many users due to its durability. Such quality is important for any material as this enables it to withstand the test of time. Materials that are durable can tolerate changing conditions of the environment allowing them to last longer to fulfill their purpose. This is also preferred for its ease of application.
Nowadays, there are different variations of this coating which are dual coating and rough coating. Dual coating is often applied to subsea pipelines and those which are exposed to tough environmental settings. This has much resistance to impact and is very flexible. Rough coating as the name implies has a rough surface which is also non slip.
Before the coating is applied, surface preparation is necessary. This can be done by thorough inspection of the surface to see if there are any imperfections or dirt. Oil and grease are thoroughly removed from the surface. Imperfections can be removed by grinding, filing, and blasting. The surface is heated before the application is started.
The coating must be immediately applied after the heating process to prevent excess cool down. If the pipe or steel surface has cooled down too much, the coating may not be able to fully cure. This can be prevented by reheating the surface to be coated. This coating is typically applied using application ring or electrostatic guns. It will dry in a few minutes until it completely cures.
A lot of manufacturers now have their own products to offer for those who need the coating material. When purchasing these products, buyers must look into the specific instructions recommended by manufacturers for the application process. Each kind of product may come with its own instructions as well as the ratio for application.
Professionals who are working on commercial or industrial piping connections can make use of fusion bond coating. This can even be used in for some residential applications depending on the needs. One must realize the benefits and advantage of using this coating material. With that, it is of much importance to find the right kind of product to use for an application.
About the Author:
People interested in learning more about fusion bond can find out details at www.abresistkalenborn.ca. They can find out why fusion bond is important at http://www.abresistkalenborn.ca.
No comments:
Post a Comment